Conventional Multi Sensor - C_9101       Aesthetically pleasing low profile design   Twin LED for 360° Vision   Removable Optical Chamber For Easy Cleaning and maintenance

Conventional Optical Smoke Detector - C_9102       Aesthetically pleasing low profile design   Twin LED for 360° Vision   Removable Optical Chamber Foe Easy Cleaning and maintenance         Conventional Fire Detection, Commercial Fire Alarm Systems, Electric Smoke Detector

Conventional Optical Smoke Detector - C_9103       Fixed Temperature and Rate of rise Heat Detection   Aesthetically pleasing low profile design   Twin LED for 360° Vision

Conventional Ultraviolet Flame Detector - C_9104       Sensitive Ultraviolet Sensor that detects the UV rays Produced by a flame   Aesthetically pleasing low profile design   Dust / Corrosion / Humidity Resistant

4-Wire Conventional Smoke Detector - R_6601       12 Vdc power conventional detector   Built-in N/O contact   Sensing chamber for exceptional dust proof ability

Intelligent Reflective Beam Detector - C_9105       Range 8-100 Meters,   2 selectable levels of sensitivity adjustment.   Ideal for Atriums, Warehouses, Shopping Centers, Airport Terminals etc.

GST Duct Probe - DP_9100       Duct probe housing for detection of smoke by sampling moving air inside the duct.   Easy maintenance as detector is mounted externally to the duct.   Pre-wired detector base

Conventional Combustible Gas Detector - C_9602L       Available for LPG, Natural Gas & Coal Gas (Specify at time of order)   Built – In Relay contacts for control of Gas Valves / Extract etc.   Built – In Sounder with 2 stage alarm

Conventional Combustible Gas Detector - C_9602LW       Available for LPG, Natural Gas & Coal Gas (Specify at time of order)   Built – In Relay contacts for control of Gas Valves / Extract etc.   Built – In Sounder with 2 stage alarm

Remote Indicator - C_9314 P       Remote indicator for direct connection to detector remote indicator terminals   Compatible with:   Addressable: I-9102R Optical Detector and I-9103R Dual Heat Detector.

Conventional Manual Call Point - C_9201       Manual Call Point (MCP) with Re – Settable (Non Breaking) Glass   Additional volt free contacts for local interfacing (i.e. PTZ camera preset)   Two parts plug-in construction with base mounted termination allows for easy installation and connection.

Conventional Manual Call Point - C_9202       Compatible with latest EN standards.   Non-breaking re-settable glass (via special key).   Two parts plug-in construction with base mounted termination allows easy installation and connection.

Weather Proof Box - C_92WPB       IP 65 protective enclousure for manual call points

Power Remote Indicator - C_9314       Conventional Alarm Indicator with local sounder   Connects to 12 or 24VDC supply.   Dimension: 120  mm × 80 mm × 49 mm

Conventional Sounder Beacon - C_9401       Conventional combined flashing high intensity LED beacon and sounder   Two part plug-in construction with base mounted termination allowing easy installation and connection   Operating voltage: Loop 24V Polarized

Conventional Sounder Base - C_9402       Conventional Base Mounted Sounder   Can be used as a common base of detector or stand alone with a cover.   Compatible sound with I-9403 / C-9403 Sounder Flasher and I-9404 / C-9404 Sounder.

Conventional Sounder And Strobe - C_9403       Two parts construction with base mounted termination allows easy installation   Strobe provided by high intensity LED cluster   Operating Voltage: Loop 24V, Polarized

Conventional Sounder - C_9404       Identical in appearance and features to the i-9403 but without the strobe element   Operating voltage: loop 24 V , Polarized   Sounder output: 94dB @ 1 meter

Strobe With Siren - AO_FS01       Electronic Bell + Bright LED Strobe small type   Electronic fire sirens are intended for fire alarm   Ploycarbonate / ABS housing

Strobe With Siren -AO_FS02       For fire alarm applications only   Polycarbonate / ABS housing   Designed to deliver maximum loud and clear fire siren sound

Strobe With Siren -AO_FS03       For fire alarm applications only   Polycarbonate / ABS housing   Designed to deliver maximum loud and clear fire siren sound

Resettable Manual Call Point - AO_RS01       Resettable manual call point   Suitable for NO or NC fire or access systems   With high impact strength, high resistance to heat

Break Glass Manual Call Point - AO_BG01       Suitable for NO or NC fire or access systems   The casing is moulded from engineered plastic   With high impact strength, high resistance to heat

Stand Alone Smoke Detecto - S_9102       Self contain Optical Smoke detector and alarm sounder   With test and reset button   9v operated

Conventional Fire Telephone Panel - FT8W       8 Zone addressable fire telephone center.   2-way voice communication   Networkable up to 8 Fire Telephone panels

Conventional Fire Telephone Panel - FT24W       24 Zone conventional fire telephone center.   2-way voice communication   Operator can select single or group call

Fire Telephone Jack - P_9911(J)       24 Zone conventional fire telephone center.   2-way voice communication   Operator can select single or group call

Fire Telephone Jack - P_9911(M)       Easy to insert mobile handset   Compatible with GST Fire Telephone Jack

Speaker Fire Telephone Outstation - P_9911(S)       Hands-free extension of fire telephone.   Compatible with all GST conventional fire telephone handset in same zone

Fixed Fire Telephone Handset - P_9911(F)       Fixed extension of fire telephone System   Box for total protection.   Wall Mounted and easy installation

Deep Base - C_94DB       Optional Deep Base For Sounder And Strobe (I-9403 / I-9404)

Standard Detector Base - DZ_03       Fixing & Terminating of Conventional Detectors with directional gaps.   Compatible with GST conventional detectors using 4K7 Ohm resistor end of line. (EOL)   Common base for GST C-9101/2/3/4

Diode Conventional Base - DZ_03D       Diode base version for conventional detectors utilizing the Active End Of Line(AEOL) (P-9907)   Common base for C-9101/2/3/4

Active End Of Line - P_9907       Active End Of Line For Conventional Fire Detection Zones   It Can be used as Conventional Detector Base or Work independent with a cover   Provide detector removal indication while still enabling alarms 360 ° down stream of the missing device to be detected

Protective Flip Cover - C_92FC       Protects call point from accidental operation, suitable for C-9202 Manual Call Point

Conventional Fire Detection, Commercial Fire Alarm Systems, Electric Smoke Detector