|
For remote control of variable speed pan & tilt motor PTH355P and zoom lenses |
|
13 functions (auxiliary functions 2xdry contacts) |
|
14 presets |
|
Up to 7 selectable speeds for autopan |
|
RS232 and RS485 selectable communication |
| |
|
General |
|
13 Functions: UP, DOWN, LEFT, RIGHT, AUTO, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX1, AUX2 |
|
99 selectable address through Dip Switch |
|
Serial input selectable: RS232 or RS485 |
|
Repeater RS232 or RS485 for daisy chain configuration |
|
Ability to use both polarity inversion lenses and common wire lenses |
|
PRESET / SCAN / PATROL functions, 4 alarm contacts |
|
Ability to memorize up to 14 preset functions (P&T motor, lens) |
|
LED indicating power supplied to the unit |
|
Optoisolated digital logic and power section |
|
EEPROM for the storage of active options |
|
Supplied with instruction manual, 2 PG11 blanking caps, 4 wall mounts with relevant fastening screws |
| |
|
Mechanical |
 |
Plastic material enclosure |
|
6 cable glands PG11 |
|
External dimensions: 255x200x100mm (10x7.87x3.93in) |
| |
|
Compliance To |
|
CE according to EN 61000-6-3, EN 60065, EN 50130-4 |
|
IP56 |
