|
Made of aluminium and polycarbonate |
|
IP66 |
|
Two infrared LED illuminators for night surveillance |
|
Available with/without camera and with/without wiper |
|
Easy installation and replacement on-site thanks to optional set-up data in flash memory and accurate mechanical construction |
|
Variable speed: 0,1-40°/s Pan; 0,1-30°/s Tilt |
|
Electronic limit switches |
|
Autopan, Preset, Patrol |
|
Up to 250 Presets |
|
OSM configuration |
|
RS485, RS422 and over coax control |
|
Multiprotocol |
| |
|
General |
|
For missing specs refer to “ULISSE” data sheet, standard version |
|
Build in die-cast aluminium and ABS Epoxypolyester powder painting, RAL9002 colour |
|
Top mount (OTT) |
|
Transmission through toothed belt |
|
Slip-ring |
|
Electronic limit switches |
|
Plug installation thanks to connector and easy replacement on-site |
|
Zero backlash |
|
Supplied with instruction manual |
|
The correct working of the unit is guaranteed only with the following Ir LEd illuminators: |
| |
- Videotec IRBD series |
| |
- DERWENT UFLED |
| |
- RAYTEC 100 (with U bracket) |
| |
- RAYTEC 200 (with U bracket) |
| |
|
Mechanical |
|
Horizontal rotation limited to +/-160° |
|
Vertical rotation from -90° to +40° |
|
Variable pan speed: from 0.1°/s up to 40°/s |
|
Variable tilt speed: from 0.1°/s up to 30°/s |
|
Internal usable area (BxHxL): 104x70x280mm (4.1x2.7x11in) |
|
Glass window (WxH): 118x75mm (4.6x2.9in) |
| |
|
Compliance To |
 |
CE according to EN60950, EN61000-3-2 and EN50130-4 |
|
FCC part 15 IP66 according to EN60529 |
