|
Constructed in solid, anticorodal aluminium alloy |
|
Powder painted RAL7032 |
|
Germanium window glass |
|
IP66 |
|
Standard equipped with heater, optionally with sunshield |
|
Version available with reinforced (triple) heater 24Vac and special painting for low temperature application (EXHC003RG, EXPTC033RG) |
|
ATEX Ex 2 GD Ex d IIC T6 tD A21 IP66 T85°C, GOST-R 1ExdIICT6 и
DIP A21 TА T6 certified |
| |
|
General |
|
Non-corrosive die-cast aluminium (anticorodal) |
|
Bicomponent polyurethane enamel with orange peel effect, RAL7032 |
|
Special painting for low temperature, blue color (EXPTC033R, EXPTD035R, EXPTWB00R). Resistant to stress cracking, adverse weather conditions, detergents, salt-spray and typical airborne pollutants |
|
Supplied with instruction manual and conformity declaration |
| |
|
Mechanical |
|
2x3/4”GAS cable glands |
|
External dimensions |
| |
EXHC Ø 210mmx427.5mm (8.2x16.8in) |
| |
EXHD Ø 250x573.5mm (9.8x 22.6in) |
 |
Internal dimensions |
| |
EXHC Ø 180x380mm (7x14.9in) |
| |
EXHD Ø 180x460mm (7x 18.1in) |
|
Internal usable area |
| |
EXHC 100x100x280mm (3.9x3.9x11in) |
| |
EXHD 100x100x360mm (3.9x3.9x14.1in) |
|
Glass window |
| |
EXHC Ø 114mm (4.5in) |
| |
EXHD 70x56mm (2.7x2.2in) |
|
Device for the protection of the glass |
| |
Device for the protection of the glass Ø 250x140mm |
| |
Mylar film 80mm (3.1in) wide and 18m (59ft) length, 350 shifting steps, marks printed on the last 50cm (19in) |
|
Wall mount |
| |
Payload: 35kg (77lb) |
| |
Length: 455mm (17.9in) |
|
Parapet mount |
| |
Payload: 35kg (77lb) |
| |
|
Compliance To |
|
IECEx (TUV Nord Certification), protocols IEC 60079-0:2000, IEC 60079-1:2001, IEC 61241-1:2004 |
|
Ex d: explosion-proof housing for potentially explosive environments |
|
IIC: gases group |
|
T6: device class temperature |
|
Ex tD A21: dust ignition protection, zones type 21-22 |
|
IP65: enclosure weatherproof standard |
|
T 85°C: max superficial temperature |
|
ATEX ( TUV Nord Certification), directive 94/9/CE |
| |
- Group: II (surface device, no mining) |
| |
- Category: 2 (elevated protection degree, the devices of this category can be installed in zone 1 and 21 and in zone 2 and 22) |
| |
- Atmosphere type: GD (gases and dusts) |
| |
- EEx d: explosion-proof housing for potentially explosive environments |
| |
- IIC: gases group |
| |
T6-T85°C: temperature classification for gases and dusts respectively |
| |
- IP65: enclosure weatherproof standard |
| |
- EXHC000 - EXHD001 - EXHC003R - EXHD005R |
| |
- Ex d IIC T6 Ex tD A21 IP65 T85°C IECEx |
| |
- Ex II 2 GD EExd IIC T6 T85°C IP65 ATEX |
| |
- Ex 0044: notify number from competent body UL certification pending |
| |
- GHOST certification pending |
