| |
|
Features of PCB Camera |
| |
|
Built with ADVERT PRO Ray Gold Board |
| |
|
Sony CCD & SS-11 RM DSP Chip Sets |
| |
|
Wide In-put Voltage Range (DC 7.5V to DC 18V) |
| |
|
Power Consumption (1/3" CCD-Dc 12V/70mA) |
| |
|
Lowest Operating Temperature |
| |
|
32X32mm main Board & 23.6 X 18 mm Pi-DIP Board |
| |
|
Metal Lens Mount M12X0.5 or M14(W/O Thread) |
| |
|
Fixed to Mirror Option On Request For CAR Use |
| |
|
High Illumination Mask On Req. For CAR Parking |
| |
|
Dual Solder Mask PCB for Corrosion Protection |
| |
|
Gold processed back shell for EMC Shielding |
| |
|
Immersion Gold PCB Surface Finish |
| |
|
Ultra Clear Image Performance |
| |
|
Super Sensitive Low Lux Image Capture |
| |
|
1/3" format CCD Sensor |
| |
|
DIP Switch For Professional Installation Setup |
| |
|
6 Types White Balance Setup |
| |
|
Shutter Fixed 1/100 or 1/120 |
| |
|
AGC High/Low Setup |
| |
|
Back Light Compensation On/Off |
| |
|
Electronic Auto Iris/Manual Iris |
| |
|
Auto Exposure/8 Types Fixed |
| |
|
|
| |
|
Technical Specification of PCB Camera |
| |
|
Image sensor : Sony 1/3" |
| |
|
Scanning system : 2:1 Interlace |
| |
|
Scanning frequency (H) : 15734Hz |
| |
|
Scanning frequency (V) : 59.94 Hz |
| |
|
Sync. System : Internal |
| |
|
Signal system : 525 lines |
| |
|
Total effective pixels : 380K |
| |
|
Standard Lens Type :1/3" 92 degree view (Diagonal) |
| |
|
S/N Ratio : More than 48 db (AGC OFF) |
| |
|
Gamma : 0.45 |
| |
|
Resolution : 480 lines |
| |
|
Video output level : 1.0 Vp-p (75 Ohms , composite) |
| |
|
Focus Mode : Manual |
| |
|
Min. illumination : 0.5 Lux (F1.2) |
| |
|
White Balance : User Selectable With DIP Switches |
| |
|
Shutter Fixed : User Selectable With DIP Switches |
| |
|
AGC : User Selectable With DIP Switches |
| |
|
BLC : User Selectable With DIP Switches |
| |
|
Iris : User Selectable Iris Mode Manual With DIP switch On/Off |
| |
|
Exposure(AE/ME) : User Selectable Exposure Mode Auto Exposure & Manual With DIP Switch On/Off & manual Type Fixed Shutter Speed |
| |
|
Mirror : Fixed to Mirror Option On request For CAR Rear Vision |
| |
|
High illumination Mask Function : Fixed to High illumination Mask Option On request For Car Rear Vision Application and & Car parking |
| |
|
Supplied Voltage : DC 7.5V-18V (Recommendation DC 12 + 0.5V) |
| |
|
Current consumption : 90mA @ 12VDC |
| |
 |
Dimensions : 32mm X 32mm X 31.5 [(H)- Approx. With Std. Lens] |
| |
|
Weight : Approx 27.0 grams. |
